Aftermarket Cylinder Head Studs

When boosting your FE3 its a good idea to change the head gasket to a MLM type, and also change the head studs. Below is part numbers for head studs from different brands.

ARP Head Studs

  • Studs AU4.800-1LUB
  • Nuts 300-8307
  • Washers 200-8516

You will require 10 of each of the above.

Head torque is listed as 98 ft-lbs for 12mm studs with ARP Lube. These should be progressively torqued down as per OEM specification.

fe3/engine/cylinder_head_studs.txt ยท Last modified: 12/09/2020 05:49 by lynxdragon
CC Attribution-Noncommercial-Share Alike 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0